RGB

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Ycbcr

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Composite

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Analog Reference Signal

• Compatible SDI Systems Can be displayed for SD, HD, 3G-A, and 3G-B-DL

Vectorscope

• Gain: ×1, ×5, IQ-MAG
• Scale:
  Type AUTO, ITU-R BT.601, ITU-R BT.709, DCI, ITU-R BT.2020
  Color Bar Saturation 75 %, 100 %
  IQ Axis Show or hide
• Vector Marker Display

5BAR RGB GAMUT

• Function: Converts an SDI signal into Y, R, G, B, and composite values, and then displays the five peak levels.
• Error Level: Based on the gamut error, composite gamut error, and luminance error thresholds

Histogram

• Histogram Display: Displays the Y, R, G and B histograms 

CIE Colour Chart

• Display Standard: CIE1931 (xy display), CIE1976 (u'v’ display)
• Display Type: Chromaticity diagram display, color temperature display
• Display Mode:
   Chromaticity Diagram Display
   Luminance display, color display
• Color Temperature Display Luminance display:
  Colorimetry ITU-R BT.601 (525), ITU-R BT.601 (625), BT.709, DCI, ITU-R
  BT.2020

Picture View

• Level Mapping: Maps the black level to 0 (8bit), SDI code value (when receiving 10 bit RGB) 1024 to 255 (8 bit)
• Display Sizes: Reduced, actual size, ×2 (4K not supported), full frame (4K not supported)
• Quality Adjustment and Color Selection:
  Brightness, contrast, RGB gain, RGB bias, chroma gain,
  monochrome display (RGB gain, RGB bias, chroma gain not valid)

5BAR Gamut Error

• Error Indication: Displays markers in the gamut error and level error areas

SCTE-104

• • Function: SCTE-104 message monitoring
  • Supported: Standard SMPTE 2010, ANSI/SCTE 104

Cinelite

• • Function: Video levels are displayed numerically.
  • f Stop Display (not supported on the SER23):
    Displays f Stop values relative to a reference point
    Set in reference to an object with an 18% reflectance
    f Stop gamma correction
  • HDR Display (SER23)

Closed Caption Display

• • Function: CEA-608, CEA-708 closed caption, Teletext, OP47 subtitle superimposed on SDI signal can be decoded and displayed.

V-Chip

• • V-Chip Display

Audio Bar Graph

Input Signal: SDI embedded audio

Event Log

• Function: Records detected errors, events—such as the instrument
  switching between input signals, and timestamps.
• Log Capacity: Up to 1000 events
• Data Output Overwrite mode, Stop after 1,000 events

Data Dump

• Display Format: Displays serial data sequence or displays each color
  component separately
• Line Select: Displays the selected line
• Sample Select: Displays from the selected sample
• Jump Feature: Jumps to an EAV or SAV
• Data Output: Text output to USB memory

Phase & Timing Difference

• Function: Displays the phase difference between a reference signal and
  an SDI signal numerically and graphically
• Reference Signal: SDI / External sync signal, PTP (SER05/SER06) (*1)
  RTP, External sync signal (BB), FPT (SER06)   *1 Complies only with SMPTE ST 2110 

Status Indication

• Signal Detection
• Displays the video signal format
• Frequency Deviation Display (not displayed for IP signals)
• Equivalent Cable Length Display (not displayed for IP signals)
• Error Count Display
• Video Error Detection

SR Live Packet Display

• SR Live Metadeta analysis display

EYE Pattern Display

• The eye pattern waveform, jitter waveform of SDI signal, and the measurement result of each parameter can be displayed.
• Only BNC input 1 supports eye pattern display.

Dual Eye Pattern

• Simultaneous display of Alignment and Timing

Capture Function

• Screen capture: A screen capture function to capture the display screen as still image data and a frame capture function to capture 16 frames of data are equipped.
• Frame capture: A frame Capture function to capture 16 frames of the SDI signals is equipped. There are two methods; one is to import them manually and another is to take them automatically when an error occurs.
  * Only one frame is captured when an error occurs.

Frame Capture View

• Function: Search for data captured by the frame capture function, error search, and export to CSV are possible.

Touch Panel Operation

• Excellent operability: The LV5600 adopts a 7-inch full HD panel with a touch panel function.

Web Browser

• Controlled remotely from a Web browser on a PC over an Ethernet connection, and used to perform automatic measurements using TELNET or FTP.

Mouse Operation

• All operations are possible just by connecting the mouse.

Multi-Lissajous, Status and Surround Display

• Lissajous display, surround display, mute, clip error detection, etc. are now available. Various analysis display is also possible, and simultaneously display of 8 channels from one SDI signal and 4 channels from 2 SDI signals is possible.
• Embedded audio　　　
  SMPTE ST 299, SMPTE ST 272, 48 kHz/24 bit/L-PCM
  * Synchronization condition Must be synchronized to the video clock. All SDI signals must be synchronized.

Lip Sync (AV Delay)

• Measures the time difference between the SDI signal and digital audio signal with a Leader TSG that supports lip syncing. Displays the results numerically and graphically.
• *TSG patterns not made by Leader may be supportable by specifying the video signal setting and audio signal setting.

HDR Zone

• HDR zone display: The luminance distribution of the HDR area can be easily confirmed by coloring the SDR area with monochrome, and the HDR with a color according to the brightness.
• HDR point measurement: The crosshairs can be freely moved. Up to 3 points can be measured simultaneously
• Approved standard
  ITU-R BT. 2100 (HLG, PQ), S-Log 3, C-Log, Log-C
  It corresponds to all except SD input of SDI.

HDR Waveform

• HDR waveform display
• HDR point measurement: 
  The crosshairs can be freely moved.
  Up to 3 points can be measured simultaneously
• Approved standard
  ITU-R BT. 2100 (HLG, PQ), S-Log 3, C-Log, Log-C
  It corresponds to all except SD input of SDI.

TSG Option

• Output pattern: 100% color bar, 75% color bar, HD multiformat color bar *1, 4K multiformat color bar *1, color raster, gamma, cross hatch, 10 step, limit lamp, check field, lip sync pattern(LV5600-SER03 is required), HDR color bar (LV5600-SER23 is required) *1
• Scrolling *2　
  Direction: Eight directions (up, down, left, right, and their combinations)
  Speed: Range and Unit Per frame (field) 4 to 124 dots, in 4 dot steps
• Moving Box *2 : ON / OFF
  Colors: WHITE / YELLOW / CYAN / GREEN / MAGENTA / RED / BLUE / BLACK
  Speed: 1 to 3
• Embedded Audio
  *1 It cannot be set in horizontal 4096 and 2048 pixel format.
  *2 Either scrolling, or moving box can be turned on.

Automated Focus Assist

• This is a focus detection function realizing a new algorithm based on nonlinear super resolution technology.
• Sensitivity can be selected from 5 levels according to the video scene.

Focus Assist - Sensitive Mode

• Focus assist function in the dark

Customisable Layout 

• Various items such as video signal waveforms display, vector display waveforms, and images of input signals can be laid out in any position with your user’s preferred size. Multiple input signals up to 4 inputs can be displayed simultaneously, or one input signal can be displayed on multiple screens.

Customisable Layout - Continued

• Swapping vector and audio

Display Assignment

• 1 SDI input signals of 1 to 4 input terminals can be allocated to A to D display channels.

Display Assignment - Continued

• For example, displaying the signal input to SDI input 1 as component video waveform can be displayed on display channel A and the composite video waveform can be displayed on display channel B.

Enhanced Layout

• Enhanced layout is an extended function that enables the measurement screens of up to four
  channels to be laid out on a single screen simultaneously in simul mode.

ID, Iris, Tally Displays

• Serial communication RS-422/485 terminals enable to display camera ID, and tally. Fast switching of tally display by remote terminal is also possible.

Format Correspondence Table by Option

4K Payload ID

• Display 4K Payload ID status such as 12G / 6G / 3G

BT.2020 Compatible Vectorscope

• BT.2020/BT.709 compatible vectorscope scale simultaneous display

Extended Vectorscope

• RGB Vector and YCbCr Vector