RGB

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Ycbcr

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Composite

• Overlay: Overlays component signals
• Parade: Displays component signals side by side
• Blanking Interval: H and V blanking periods can be masked.
• Line Select: Displays the selected line
• Variable Gain:
  Gain x1 ×0.2 to ×2.0
  Gain x5 ×1.0 to ×10.0
  Gain x10 ×2.0 to ×10.0

Analog Reference Signal

• Compatible SDI Systems Can be displayed for SD, HD, 3G-A, and 3G-B-DL

Vectorscope

• Gain: ×1, ×5, IQ-MAG
• Scale:
  Type AUTO, ITU-R BT.601, ITU-R BT.709, DCI, ITU-R BT.2020
  Color Bar Saturation 75 %, 100 %
  IQ Axis Show or hide
• Vector Marker Display

5BAR RGB GAMUT

• Function: Converts an SDI signal into Y, R, G, B, and composite values, and then displays the five peak levels.
• Error Level: Based on the gamut error, composite gamut error, and luminance error thresholds

Histogram

• Histogram Display: Displays the Y, R, G and B histograms 

CIE Colour Chart

• Display Standard: CIE1931 (xy display), CIE1976 (u'v’ display)
• Display Type: Chromaticity diagram display, color temperature display
• Display Mode:
   Chromaticity Diagram Display
   Luminance display, color display
• Color Temperature Display Luminance display:
  Colorimetry ITU-R BT.601 (525), ITU-R BT.601 (625), BT.709, DCI, ITU-R
  BT.2020

Picture View

• Level Mapping: Maps the black level to 0 (8bit), SDI code value (when receiving 10 bit RGB) 1024 to 255 (8 bit)
• Display Sizes: Reduced, actual size, ×2 (4K not supported), full frame (4K not supported)
• Quality Adjustment and Color Selection:
  Brightness, contrast, RGB gain, RGB bias, chroma gain,
  monochrome display (RGB gain, RGB bias, chroma gain not valid)

5BAR Gamut Error

• Error Indication: Displays markers in the gamut error and level error areas

SCTE-104

• • Function: SCTE-104 message monitoring
  • Supported: Standard SMPTE 2010, ANSI/SCTE 104

Cinelite

• • Function: Video levels are displayed numerically.
  • f Stop Display (not supported on the SER23):
    Displays f Stop values relative to a reference point
    Set in reference to an object with an 18% reflectance
    f Stop gamma correction
  • HDR Display (SER23)

Closed Caption Display

• • Function: CEA-608, CEA-708 closed caption, Teletext, OP47 subtitle superimposed on SDI signal can be decoded and displayed.

V-Chip

• • V-Chip Display

Audio Bar Graph

• Input Signal: SDI embedded audio
  Digital audio I/O connector (SER03)
  Analog audio input (SER03) SFP IP Audio (SER05/SER06)
• Format: L-PCM, Dolby-E (SER04), Dolby Digital (SER04),Dolby Digital Plus (SER04)

Lip Sync (AV Delay)

• Measures the time difference between the SDI signal and digital audio signal with a Leader TSG that supports lip syncing. Displays the results numerically and graphically.
• *TSG patterns not made by Leader may be supportable by specifying the video signal setting and audio signal setting.

Event Log

• Function: Records detected errors, events—such as the instrument
  switching between input signals, and timestamps.
• Log Capacity: Up to 1000 events
• Data Output Overwrite mode, Stop after 1,000 events

Data Dump

• Display Format: Displays serial data sequence or displays each color
  component separately
• Line Select: Displays the selected line
• Sample Select: Displays from the selected sample
• Jump Feature: Jumps to an EAV or SAV
• Data Output: Text output to USB memory

Phase & Timing Difference

• Function: Displays the phase difference between a reference signal and
  an SDI signal numerically and graphically
• Reference Signal: SDI / External sync signal, PTP (SER05/SER06) (*1)
  RTP, External sync signal (BB), FPT (SER06)   *1 Complies only with SMPTE ST 2110 

Status Indication

• Signal Detection
• Displays the video signal format
• Frequency Deviation Display (not displayed for IP signals)
• Equivalent Cable Length Display (not displayed for IP signals)
• Error Count Display
• Video Error Detection

SR Live Packet Display

• SR Live Metadeta analysis display

Capture Function

• Screen capture: A screen capture function to capture the display screen as still image data and a frame capture function to capture 16 frames of data are equipped.
• Frame capture: A frame Capture function to capture 16 frames of the SDI signals is equipped. There are two methods; one is to import them manually and another is to take them automatically when an error occurs.
  * Only one frame is captured when an error occurs.

Frame Capture View

• Function: Search for data captured by the frame capture function, error search, and export to CSV are possible.

Touch Panel Operation

• Excellent operability: The LV5600 adopts a 7-inch full HD panel with a touch panel function.

Web Browser

• Controlled remotely from a Web browser on a PC over an Ethernet connection, and used to perform automatic measurements using TELNET or FTP.

Mouse Operation

• All operations are possible just by connecting the mouse.

Input/Output Terminal

• SDI input 4 BNC connectors
• SDI output 4 BNC connectors (main unit standard equipment)
• Re-clocked Output signal
• The re-clocked output of input SDI signal is available on the respective SDI output terminal.

Input/Output Terminal 2

• Through settings and selection settings
• Through and selection settings in Display Assignment

Input/Output Terminal 3

• Through and selection settings in Display Assignment
• No delay when setting through and selection settings

SDI Signal Data Analysis

• The status display has an error detection function of CRC and embedded audio. It also has an event log, data dump, phase difference measurement functions, and can analyze SDI signals.

EYE Pattern Display

• The eye pattern waveform, jitter waveform of SDI signal, and the measurement result of each parameter can be displayed.
• Only BNC input 1 supports eye pattern display.

Dual Eye Pattern

• Simultaneous display of Alignment and Timing

Multi-Lissajous, Status and Surround Display

• Lissajous, Status and Surround Display

Loudness Monitoring

• Function: Loudness chart display, numeric display, log, level meter display, peak value display
• Supported: Standard ITU-R BS.1770, ARIB TR-B32, EBU R128, ATSC A/85
• Measurement: Channel Simultaneous measurement of two audio sources

16-Channel Audio Display

• 16ch level meter, Lissajous, surround and status can be displayed by adding LV5600-SER03.

Loudness

• Function: Loudness chart display, numeric display, log, level meter display, peak value display
• Supported: Standard ITU-R BS.1770, ARIB TR-B32, EBU R128, ATSC A/85
• Measurement: Channel Simultaneous measurement of two audio sources

Dolby Metadata Display

• Decoding display of Dolby E, Dolby Digital, Dolby Digital Plus becomes possible by adding
  LV5600-SER 04 to LV5600-SER 03 option.

IP Status

• IP Packet Status Display: The apparatus displays information, including source addresses, destination addresses, and protocols for the IP packets. Display traffic of 10G/25G Ethernet graphically.

Packet Jitter

• Packet Jitter Measurement: The apparatus measures the arrival intervals of IP stream packets and graphically display temporary fluctuations.
• CSV file copy of Graph data

PTP Status Info

• PTP Packet Status Display: The apparatus graphically displays PTP time information and network delay information.
• CSV file copy of Graph data

PTP Timing Comparison

• Video timing relative to PTP
• Audio timing relative to PTP
• Ancillary timing relative to PTP
• Graph display of PTP and each phase

PTP Phase Measurement

• Video timing with respect to PTP

PTP Path Delay

• Measures the time difference between arriving packets between two IP ports

SFP Information

• SFP transceiver module (IP1 port / OP2 port)
• Display each information

Packet Header

• Displays the MAC and IP of PACKET HEADER

Event Log

• Displays UDP and RTP of PACKET HEADER

NMOS

• Recorded in the event log when an IP error occurs

4x IP Streams

• Possible to monitor up to four channels simultaneously

IP Multi

• You can measure simultaneously by combining four IP and SDI

IP Pattern Generator
Requires LV5600 - SER32

• IP Format Ready: Test pattern signal streams conforming to IP format (SMPTE ST 2110-20/30/40) can be generated
• Network Synchronization: Video and audio test signals can be generated in synchronization with SMPTE ST2059 PTP (Precision Time Protocol)
• Packet Error: Packet errors can be added to the test signals (Only ST2110) (Only PORT 1 is supported)
• Packet Jitter: Packet jitter can be added to the test signals (Only ST2110) (Only PORT 1 is supported)

Buffer Measurement

• The measured values of CINST, VRX, or FPT are displayed when the transmission type of SMPTE ST2110-21 is Narrow, Narrow Linear, or Wide. CMAX indicates the value when the packets being sent are full. VRX indicates the value of the virtual receive buffer

HDR Zone

• HDR zone display: The luminance distribution of the HDR area can be easily confirmed by coloring the SDR area with monochrome, and the HDR with a color according to the brightness.
• HDR point measurement: The crosshairs can be freely moved. Up to 3 points can be measured simultaneously
• Approved standard
  ITU-R BT. 2100 (HLG, PQ), S-Log 3, C-Log, Log-C
  It corresponds to all except SD input of SDI.

HDR Waveform

• HDR waveform display
• HDR point measurement: 
  The crosshairs can be freely moved.
  Up to 3 points can be measured simultaneously
• Approved standard
  ITU-R BT. 2100 (HLG, PQ), S-Log 3, C-Log, Log-C
  It corresponds to all except SD input of SDI.

TSG Option

• Output pattern: 100% color bar, 75% color bar, HD multiformat color bar *1, 4K multiformat color bar *1, color raster, gamma, cross hatch, 10 step, limit lamp, check field, lip sync pattern(LV5600-SER03 is required), HDR color bar (LV5600-SER23 is required) *1
• Scrolling *2
  Direction: Eight directions (up, down, left, right, and their combinations)
  Speed: Range and Unit Per frame (field) 4 to 124 dots, in 4 dot steps
• Moving Box *2 : ON / OFF
  Colors: WHITE / YELLOW / CYAN / GREEN / MAGENTA / RED / BLUE / BLACK
  Speed: 1 to 3
• Embedded Audio
  *1 It cannot be set in horizontal 4096 and 2048 pixel format.
  *2 Either scrolling, or moving box can be turned on.

Automated Focus Assist

• This is a focus detection function realizing a new algorithm based on nonlinear super resolution technology.
• Sensitivity can be selected from 5 levels according to the video scene.

Focus Assist - Sensitive Mode

• Focus assist function in the dark

Customisable Layout 

• Various items such as video signal waveforms display, vector display waveforms, and images of input signals can be laid out in any position with your user’s preferred size. Multiple input signals up to 4 inputs can be displayed simultaneously, or one input signal can be displayed on multiple screens.

Customisable Layout - Continued

• Swapping vector and audio

Display Assignment

• 1 SDI input signals of 1 to 4 input terminals can be allocated to A to D display channels.

Display Assignment - Continued

• For example, displaying the signal input to SDI input 1 as component video waveform can be displayed on display channel A and the composite video waveform can be displayed on display channel B.

Enhanced Layout

• Enhanced layout is an extended function that enables the measurement screens of up to four
  channels to be laid out on a single screen simultaneously in simul mode.

ID, Iris, Tally Displays

• Serial communication RS-422/485 terminals enable to display camera ID, and tally. Fast switching of tally display by remote terminal is also possible.

Format Correspondence Table by Option

4K Payload ID

• Display 4K Payload ID status such as 12G / 6G / 3G

4K Status

• 4K status mode
• ※LV5600 and LV7600 are supported

4K Picture - Dot by Dot Mode

• 4K real image

4K Phase Comparison

• 4K Quad Link phase differences between links
• ※LV5600 and LV7600 are supported

4K Phase Comparison - Continued

• 4K Quad Link phase differences between external reference and the links
• ※LV5600 and LV7600 are supported

BT.2020 Compatible Vectorscope

• BT.2020/BT.709 compatible vectorscope scale simultaneous display

Video Noise Meter

• Support various formats
• Noise Measurement Frequency Band
• Full Digital Processing
• Measurement Window
• Alarm Function

Colorimetry Zone

• This feature simplifies the task of identifying the reproduction errors which can occur when transmitting video content produced in BT.709, DCI-P3 or BT.2020 wide color gamut or when converting content from BT.2020 to narrow color gamut.

IP TSG
Requires LV5600 - SER06

• IP Format Ready: Test pattern signal streams conforming to IP format (SMPTE ST 2110-20/30/40) can be generated.
• Network Synchronization: Video and audio test signals can be generated in synchronization with SMPTE ST2059 PTP (Precision Time Protocol).
• Packet Error: Packet errors can be added to the test signals. (Only ST2110)(Only PORT 1 is supported)
• Packet Jitter: Packet jitter can be added to the test signals. (Only ST2110)(Only PORT 1 is supported)

Character Generator

• Character Generator: It's possible to overlay characters on the signal.

JPEG XS, ST2110-20 and SDI Simultaneously

• Compressed (JPEG XS), uncompressed (ST2110), SDI, Simultaneous monitoring
• Simultaneous monitoring enables verification of the image quality affected by compression.

JPEG XS & ST 2110 Comparison

• Possible to compare compressed signals.

Test Signal Generator
Requires LV5600 - SER32

• Possible to JPEG XS Test Signal Generator. ※LV5600-SER32 is required

Packet Header Analysis

• Analyzing the header of JPEG XS packets and displaying the contents of VideoSupportBox and ColourSpecificationBox.

JPEG XS Format Comparison

• We will compare the format information in SDP, ST2110-40 (Payload ID),and ST 2110-22 (JPEG XS).
• Any differing items will be highlighted.

Extended Vectorscope

• RGB Vector and YCbCr Vector